The rubber hose pipe is widely used in beach, river, lake, marine dredging.
Usually it is connected with sand dredger or pump for the discharging of slurry,
sand, or mixture. Its flexible design can reduce the swaying caused by waves.
Dredging rubber hoses consist out of an inner lining adjusted to the specific requirement of transported media. Wear indicator layers can be implemented in the hoses which transport abrasive media. A textile reinforcement of high tensile strength will control the pressure resistance of the dredging hose as well as the tensile strength. Where as the outer cover is built up by a rubber compound highly resistant against weathering, UV lights and Ozone. On special request the outer cover can be built with oil resistant materials.
Suction hose with steel flange is assembled with dredgers to deliver silt and gravels. Wall thickness of the pipe is from 31mm~58mm. The suitable working temperature is from -20°C to 50°C. It is convenient to install, flexible to use, safe, wearing-resistant and bending-resistant.
1. Used in wind-pressured sand -spraying machine to get rid of the rust by spraying sand or with iron ball.
2. Widely used for sucking or discharging of water, sand, air, and powders in industry, agriculture, factory, mining and building etc..
3. All kinds of sand rubber suction hose are made in suitable materials due to different purposes.
1. This kind of rubber hoses have almost no tolerance, and they are capable of resistance to sand and water, light, small flexible and wear well. The minimum explosive pressure is fourfold to work pressure.
2. Abrasion resistant, weather resistant,and zone resiatant. It is strong and durable.
3. They are logical designed, excellent qulity, and durable.
Discharge dredging hose can be equipped with all the different types of flanges supplies. They are available in any size, burst pressure up to 150 bar. Liner thickness specified applies to the inside of the hose as well as the flanges.
1.Working temperature: -20℃ to +50℃.
2.Convenient to install,flexible and safe to use.
3.Excellent performance of abrasion-resistant and bending resistant.
Structure and Material:
1.Cover: composed of natural rubber and synthetic rubber.
2.Reinforcement layer: composed of high strength rubber dipped chemical fiber and reinforced by spiral metal wire.
3.Inner rubber liner: composed of wear-proof natural rubber and synthetic rubber.
Dredging Suction hose mostly used with these hoses are the rubber flange/steel backing flange and the double action flange.
Specification Table of Braided Hose:
|Ship type||Dredging hose I.D.||Thickness of the steel ring||Number of tyre cord layer||Length|
|350m3/H||560 mm||35 mm||12||1500mm|
Note: other size can be customized
Physical Index of Braided Hose:
|Testing Item||National Standard of Hose Lining||Standard of the Company|
|Tensile Strength at Break (MPa)||>12||>150|
|Elongation at Break %||>400||>500|
|Akron Abrasion cm3/1.6km||1||<0.8|
|Application Temperature °C||-40~+60|